Fashion women have long been fond of hairstyle bow of hair. It attracts attention, looks stylish and replaces fashionable expensive accessories. One of the main advantages: you can do it yourself and prepare for any event, even if there is not enough time left.
on long hair ;
on hair of medium length;
for short haircuts;
in combination with malvinka;
as an ornament of weaving;
bow on the side;
Hairstyle fits any style of clothing. During the morning run, it does not disintegrate, and on the red carpet will attract the enthusiastic views of others. Depending on the size of the bow, the shape and method of creation, you can set the mood for the whole day.
A hair bow is considered a universal hairstyle also because it can be made from even and curly strands on either side of the head. However, it is not necessary to do it if the hair is in poor condition. Dull and fragile curls will not look good. The design will not suit girls with rough features: a large nose, a wide forehead and a rectangular chin will visually enlarge.
Bow adorns the volumetric high beam
Method 1. For long hair.
The first step is to collect the hair in a high tail . It is firmly tied with a rubber band. The second rubber band fix the tail so that it curls in half, forming a loop. At the same time, the ends should fall down in front of the frontal zone of the head. Then the resulting loop is divided into two equal parts with the tips falling to the forehead and fixed with invisible backs.
Long hair makes it possible to experiment. Therefore, we can single out another method of creating a stylish bow at home. The tail is also made for it, but it is divided into three parts by rubber bands. Each gum should be carefully hidden behind a small strand, wrapping them and fixing them invisible. Then the split tail must be laid so that it is ahead of the base of the tail. The tips can be evenly distributed behind the head, hidden in a bow, or positioned so that they look funny because of the hair.
At the end, the hair is sprayed with varnish to keep well.
Method 2. On the hair of medium length.
First you need to gently comb all the hair in a high tail. While tightening their elastic, no need to remove the hair to the end. There should be a loop, with an end that falls off in advance. The loop should be divided into two equal parts and smoothed in the middle. The front strand is shifted back, forming the middle of the bow. Carefully attached invisible.
The tail can be tied in a different way. From the main tail is selected a small strand for the core and is fixed in front. Then the tail is divided into two parts using the second rubber band. It is fixed at the very tips. From the hair that remains between the rubber bands, is a loop. She left the strand rewound and closes the bow.
In conclusion, we fix the construction with a lacquer of strong fixation.
Method 3. On short hair.
Owners of short haircuts rarely boast a beautiful hairstyle. Usually they are costing styling or pile. However, do not deny yourself the tricks of women. If you have patience, a bow of hair can be made on such hair.
First, you need to separate two identical strands in the temporal area and take them to the back of the head. There they are connected by a thin, almost imperceptible rubber band so that a small loop is formed. That is, pull the tips out of the gum is not necessary. Then we divide the loop into two “ears” of the bow. Hairstyle is obtained from the bottom of the head. The bow should be attached with additional hairpins so that it does not hang, to the bulk of the hair. The middle is done by a separate dedicated strand. It is best to select it in advance from above so as not to repeat all the manipulations again.
Method 4. In combination with malvinka.
Malvink’s hairstyle is familiar to all girls since childhood. Its essence is that the side strands, twisted into thin flagella, to make a rim on the head. Behind, they are connected with a barrette or a rubber band, and the rest of the hair remains intact. To create an evening Malvinki, you can twist them, or vice versa, align.
Owners of long hair are lucky. They can stylize the familiar Malvinka and use a beautiful bow of their own hair instead of the usual hairpin at the ends. So you can not only save on hairpins, but also surprise others with originality of hair.
The execution of this hairstyle is slightly different from the classic version. To do this, you need to collect not all the hair in the tail, but only select the top strands. It will turn out not very thick, but it will look great in the end. The bow itself is formed according to the previous scheme. The resulting loop of hair should be divided into equal parts, twist them together and fasten the core with a separate pre-prepared curl.
Method 5. Bow as decoration weaving.
You can experiment with pigtails in different ways, creating new amazing images. Collected convenient hairstyle can be worn on daily walks, trips to shops, to work and to festive events. Hair bow with a pigtail will last for a long time and will not spoil the mood of the dropped strands.
To create it, you first need to braid the well-known spit – spikelet. But you need to weave it not in a standard way, but from the bottom up, starting from the neck, going up to the back of the head. To make it comfortable to weave, tilt your head forward, comb your hair well, and treat your hands with wax or gel. Further the usual French braid trudges. In the process, additional strands are selected from both sides and added to the main ones. When the braid is braided to the level of the head, you need to tie a rubber tail and a loop is formed from the remaining ends. The loop is smoothly turned into a bow, dividing it into two equal parts. Locked in advance locks fixed core.
Braids can be weaved in different ways in all directions. The main thing is to leave part of the hair to create a bow.
Method 6. Bow on the side.
For hairstyles need a beautiful gum. First, the hair should be divided into four parts. They should be the same, so the area from the ear to the ear is allocated, and then the comb draws a line in the middle of the head. All the hair for hair is not needed. It is necessary to choose one of the parts, depending on which side the bow should be made of.
A strong tail is formed from the selected hair with an elastic band. You need to tie a loop with a beautiful rubber band, and hide all the ends under it. From the loop is formed a bow, whose ears should be well straightened so that they are voluminous. Secure the design with stealth or studs. To keep a neat look for a long time, you can use varnish.
Hair that remained can be left flowing, slightly twisting the individual strands, align or braid in braids – any creative wish.
Method 7. Small bows.
The basis of the hairstyle is the French braid, however, having gotten to do small neat bows on their own, they can be introduced by separate elements into other hairstyles. For ease of weaving, you will need one large stud for work and many small ones for fastenings. In the standard version, bows are located on the sides of the head, but in fact they can be made diagonally, along the fringe, around the head or behind.
For a hairstyle, you need to comb your hair and divide it in an even part into two equal parts. A hair strand of 1–2 cm in size is separated near the parting. If the bows are to be large, you can take a thicker strand. It is removed from the rest of the hair mass separately.
On the right side you need to braid a tight French braid and tie the tip with an elastic band. Next begins the formation of bows. Separate the pre-strand need to sprinkle with water or varnish. A large hairpin is passed through one binding of the braid and catches the loop of the treated strand, pulling it out.
It turns out a bow, the size of which can be adjusted by changing the size of the loops. The tail that remains from the strand must be put along the braid, the next strand will hide it.
Repeat the action to the end of the spit.
Tip! Before you do the hair, the hair needs to be prepared. Clean and dried, they will be docile, especially in combination with gel and mousse for fixing. For extra shine, you can use wax.
Step by Step instructions for creating a horse tail decorating bow
The second step. The rest of the hair should be collected in the tail at the back of the head. No need to do it too high, it will interfere. Hair will not decay in different directions, if you pre-process your hands with wax or gel. The top strand is extracted from the resulting tail and an elastic band is attached above it, it will be needed in the process of completing the design.
The third step. At the bottom of the rubber band is formed another tail so that the hair was divided into two equal parts. A neat bow is formed from these strands. It is firmly fixed invisible. You can hide the tips directly in the right or left half of the bow. They can serve as an additional volume for hair.
Fourth step. Left strand helps to make the middle of the bow. It should be put in the middle and secured with pins. It is fixed from the bottom, and the ends are also hidden inside the bow loops.
Fifth step. Strands that did not participate in the creation of the bow and remained on the sides should be twisted into flagella and also hidden in the design.
Sixth step. Complete the overall picture need styling bangs. Looks impressive light wave. The whole hairstyle is treated with strong hold hairspray.
Decoration for your hairstyles can be made with your own hands
For a flower-shaped bow, it is recommended to choose a ribbon of medium width. It is twisted so that the first coil received is connected cross-wise with the tip. Repeat the action must be repeatedly, until you get a flower of the desired splendor. It is fastened with the help of the last turn and knot in the center.
A small bow is convenient to do with a regular plug. To do this, the fork is wrapped with a thin ribbon so that one edge is free. It should be about 5 cm in length. This end is wrapped around the fork and pulled out at the bottom of the short edge. Then this tip is held in the middle of the cutlery teeth at the top of the ribbon and lowers. It remains only to thread the end of the tape into the loop that has formed.